1970
Hot Wheels
z
US - JRS - Jack Rabbit Special (6421) z
| US Casting Menu - Misc | |||||
|---|---|---|---|---|---|
| 1970 | Cars | Bodies | Bases | Misc | HK |
| Type | US Glass - 6421-017 - 8 Tools | |
|---|---|---|
| A |
 Clear |
Glass - Clear Has the slightest tint to it |
| B |
 Smoked |
Glass - Smoked A brownish yellow tint |
| C |
 Blue |
Glass - Blue |
| Compare A, B and C | All the glass parts say Rev: B | |
| Type | US Interiors - 6421-030 - 6 Tools | ||
|---|---|---|---|
| A |
 Cream |
Tool Rev: A No Front Support Posts Long Rear Support Post Small Hinge Flap |
|
| Compare A and B | |||
| B | ? | Tool Rev: B No example available |
|
| Compare B and C | |||
| C | ? |
 Black |
Tool Rev: C Pair of Front Support Posts added Shortened Rear Support Post Large Hinge Flap Cross flow point add on front Glass connection holes enlarged |
| The Earliest Interiors were not well supported within the chassis. The Trunk lid also did not open easily as it would rub against the back of the interior when someone attempted to open it. The casting changes resolved these problems. | |||
| Type | US Engines - 6421-011 - 8 Tools | |
|---|---|---|
| A |
 |
No interior support socket |
| Compare A and B | Tool Rev: C - on all parts | |
| B |
 |
Interior support socket added Two Posts slightly enlarged Two ejector pins added, one to each side of Socket |
| An Interior support post was added to keep the interior lifted to the correct height in the rear so that the trunk lid could open easily without catching on the interior. | ||
| Type | US Trunk | |
|---|---|---|
| A | x | Trunk Lid |
| All trunks remained the same. | ||
| Type | US Wheels | |
|---|---|---|
| A | x | Caps |
| B | x | x |
| info | ||
Home | FAQ | Site Map | Links | Sell-Trade | Contact | Search
Copyright © 2011 www.HWRedlines.com
All rights reserved.